To gain more space under the center hatch of the Jackson Cuda 14 I’v decided to rewire the location of the battery box. Using a piece of plexy glass I had lying around in the garage i cut a plate that would make a shelf. Then using Lexel I basically glued it in. This shelf will keep my battery centered and stowed. This way its not flopping around.

I let that set with the battery box sitting on it for a day. Then left it alone for a few weeks to see if it getting wet would break the Lexel bond to the kayak. As we know not much sticks to the poly.

I used an existing install and my existing battery box. All i did was extend the wires for the power to the stern.

Using some adhesive velcro I mounted the box to the plexy glass and now its removable!

This install will work on pretty much any kayak with an open hull and a rear hatch.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.