The new Torqeedo “C” Mount Utilizes a 4 molded threaded insert pattern consistent with Power Pole Mounting. Unfortunately the Jackson Kayak Kilroy does not come with this option. I opted to fabricate a custom mounting plate from 1/2″ Starboard then mounting to where the existing handle was located.

If I was to permanently install the mount on the rear of the Kilroy, it would interfere with my car top loading method. To remedy this issue I came up with the idea of utilizing 12″ gear track to slide the mount into a stowed position on loading, then slide out for use. I Drilled the track and countersunk larger holes to allow 1/4 20 bolts to pass through.

The use of Yakattack T bolts & Track Nuts allow quick tightening and loosening of the mount to either stow or retract for use.

The A/C motor install used all of my previous steering. I only had to modify the up/dn line for a longer distance.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.