The story:
A pretty neat install which I brainstormed up within an hour. A customer came into Delaware Paddlesports a little over a month ago sharing the same passion as I. He is a photographer. Although I don’t venture much into wildlife photography too often this is Geoff’s hobby.
Geoff was looking to get into a kayak for more options to frame wildlife in their habitat. He was interested in a sit on top kayak that he could lay prone on and set up his camera to catch that shot of a lifetime. I recommended the new 2020 Jackson Kayak Kilroy HD or the new 2020 Jackson Kayak Yupik. He seemed set on the Yupik. However due to cost decided to go with a leftover 2019 Jackson Kayak Bite in Granite.
With the extra money he decided to go with the Torqeedo option that I had informed him on. The Bite is the perfect Candidate for the Torqeedo Ultralight 403C.
The Torqeedo Ultralight 403C Uses the orignal ball and bar mounting system but is teamed up with the long life 915 wH battery!
Install:
Since there is no inside hull access on the Bite I used the molly bolts that are included in the Ultralight 403C install kit. These stainless steel anchors once inserted and tightened down expand the metal prongs that flower out to hold the anchor in place.
The Sea-Lect Designs Kayak Adjustable Footbrace w/ Rudder Control (Black) replace the stock Jackson ones using the molded in brass hull inserts for a clean no drill install.
Using the Jackson Kayak rudder tubing kit and 1/16″ stainless cable I ran the lines within the tubing on top of the deck rails utilizing pad eyes as guides which I riveted in. Then terminated the Cables at the motor steering triangle using Stainless Steel Thimble and swages which i heat shrink wrapped. Then added Nite Ize Size-2 S-Biner Dual Carabiner, Stainless-Steel, Black.
For the controller mount I used a YakAttack Mightymount XL Track, 6″ and the Yakattack Throttle Mount for Torqeedo W/LockNLoad Mounting System, 4” ext.
The Up/down lines I also ran through the pad eyes on right side to the Sea-Lect Designs Clamcleat Jr for locking the motor in the up position Controlling Up/Down and Locking in the down position.
This was a really cool and fun install!!
Installing hardware may cause damage and/or void manufacturer warranties. ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur. The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.