Upgrading a 2014 Big Rig to 2015 status is pretty simple! A few modifications have been introduced on the new 2015 Big Rig. These upgrades can be purchased from your local Jackson Kayak dealer or from the Jackson Kayak online store.

The new additions include:

1. All new Seadek style adhesive Deck Pad.
2. Upgraded leaning post Grip Shrink pads.
3. The brand new Elite 2.0 seat with Thermarest back support.
4. The brand new CAM style seat latching system which can be applied to the 2014 model.
5. Upgraded all deck rigging bungee to yellow.

Installing the deck pad:

Prior to installing the deck pad clean the deck thoroughly. Let dry completely then wipe down with rubbing alcohol and again let dry completely. The install should be done when it is warm out above 50 degrees but under 80 degrees Fahrenheit.

Using a sharpie marker align the deck pad and mark the corners where it aligns with all scupper holes. Peel back the paper that covered the adhesive align with your markings and press down firmly. The adhesive is very sticky so you really only have 1 shot.

Upgrading the leaning post pads:

You’ll need a heat gun for this operation and a razor blade for cutting the Grip Shrink. The standard grip size on the 2015 Big Rig are (2x) 4″ for the sides and (1) 9″ for the top center. Cut accordingly.  Remove the leaning post from the kayak. Remove one support brace. Slide on one 4″ piece first. position it where you would like it to be on the side with the support brace that you did not remove. Heat and shrink it in place. Repeat the same step with the 8″ piece centering it on the top portion of the bar. Once complete replace the support brace and using Loktite on the bolt that it swivels on. Reattach it to the kayak and your 2015 leaning post is complete!

Updating to the new Elite 2.0 Seat:

I am hoping replacing the seat eliminates the creaking I used to experience with the original seat. The new Elite 2.0 seat fits the 2014 Big Rig but requires the Cam seat latch system.

Cam Conversion Kit:

The cam conversion it is a easy install. It includes the star hex bit for removing the screws that secure the security bar. Simply remove one screw and loosen the other enough to slide on the loop of the cam strap. Make sure the cam lever is facing the bow. Tighten and the install is complete!

See below for a Color Chart which displays Jackson Kayaks 2015 Standard Colors and also colors that may be used to create your own custom color. Custom colors comes with an up charge. Please know that mixing some colors does come out different than they would seem to. See your local Jackson Kayak Dealer to order. 

The YakAttack NITEstripe is a great way to customize and give your boat a little character with the added safety.

The NITEstripe is an inexpensive product offered by YakAttack. There are multiple colors available including White, Yellow, Red, Green, Blue, Orange, Pink, and Black.  The adhesive strip reflects light at night making you more visible to other boats while night fishing.

Read the instructions carefully. The NITEstripe must be applied to a clean and dry surface. Rubbing alcohol and a paper towel works best.