Keeping it clear!

Bringing your new fishing kayak home is always an exciting time. Many new owners purchase accessories to add to their kayak immediately. So why paddle prior to rigging your new fishing kayak? Fishing from a small platform it is very important to place everything you will use in reach but not to interfere with other things. The main function of the kayak is the paddling stroke for propulsion. There is an area of the kayak that you will stroke and sweep. Any obstructions within the path pf the paddle will limit your paddle stroke and hence limit your speed and range of motion. Understanding the range of your stroke and sweep is very important for rod holder, camera mount, and fish finder mounting locations.

Learn how to properly paddle:

There are many resources online that can teach you a solid paddling technique. Along with the paddle strokes necessary for propelling your fishing kayak. Youtube is a great place to start. Everything is on there. A great website for learning how to paddle is www.paddling.com. Its in the website address! Although geared towards touring and sea kayaking there is plenty education us kayak anglers can benefit from there. Also if you have the time please do take an ACA accredited paddling course.

Fallen and cant get back on:

Remember kayaking is a dangerous sport. Being afloat on a very small narrow boat there is always a risk of capsizing. This is a great time to feel out your new fishing kayak. Lean on it feel where it may capsize. Then once you find that point practice a self rescue. Its great to do this with no rigging and gear for the first time. Practice is always good and can also give you an idea of where you may not want to mount an accessory due to it being in the way when trying to climb back onto your kayak. Also remember its smart to always wear your Personal Flotation Device (PFD).

Reaching can be dangerous:

Equally important as obstructions is learning and knowing your reach limitations. The hardest location to reach to is behind you. In most cases reaching behind you can make you become unstable due to the natural tendency to lean. A ground rule to remember is where your head goes the kayak follows. Its good to know your reach for control of the fish finder and the ability to grab rods from the rod holders quickly. Also many anglers use a milk crate system behind them for tackle storage as this is the original way of stowing gear it is not needed anymore due to the development of fishing style kayaks and their ample storage. Reach behind you and try different configurations.

Learning The Seat:

Some later fishing kayak models enable the ability to adjust the seat forward and aft. Remember, if you are going to be trimming out the kayak it will adjust the location of your paddle stroke and sweep. It is good not to install accessory’s that may impede this area. Gear Track mounting comes into play here as the accessory is now able to be re-positioned easily. Keep in mind that if your kayak has a high/low position seat this will change your paddle stroke. Its good to paddle from every position possible.

Track Mounting:

Track mounting has basically become an essential need for mounting accessories to your kayak. Enabling the ability to mount many different accessories for different locations, fishing types, and even kayak uses. Think if a track light. Gear tracks work the same way with the accessory having a T bolt on the end can be tightened down on any portion of the track.

Anchor Trolley:

An anchor trolley system operates like a clothes line. Utilizing 2 pulleys and a ring the system allows you to move your anchoring point from the seating position. The anchor can now be positioned to the bow or stern of the kayak. Paddling and fishing from your new kayak is important prior to installing an anchor trolley.  Dince most likely you will be drilling and thru-bolting its a great to get an idea which side you would like to anchor from. Personally my anchor trolleys are installed on the right side of the boat. Being right handed and fishing conventional gear mostly I tend to retrieve my rod pointing towards my left side.

Industry Accomplishments:

Many leading fishing kayak manufacturers are now designing boats with integrated recessed track systems. This creates the ability to trade out accessories and relocate them on the fly. However if you own a kayak or want to purchase one that does not have factory tracks you can always add them aftermarket. YakAttack a leading industry kayak fishing accessory company has a few different track system options available. They also offer a wide range of accessories that mount to the track system.

Molded inserts have become standard. Jackson Kayak started molding in brass threaded inserts in 2014 in accordance for mounting a GoPro mount and a Ram Mounts screw ball. These set points are great locations for just about any accessory you can think of. Also the locations being well thought out typically will not interfere with your paddle stroke.

Summary:

Please remember first paddle before installing accessories or you may find everything you just bolted drilled screwed and mounted to your kayak is out of reach or in the way.

KeelEazy is a PVC product manufactured to protect Thermoformed kayak keels. The Keel is a part of the kayak that protrudes along the center of the underside of the hull. Thermoform ABS plastic being both strong and thin is actually more abrasive than typical Poly rotomolded kayaks. To extend the life of the kayak and to protect your investment I recommend installing Keel Easy. KeelEazy will protect your kayak against abrasive scuffs, wear and scratches to the keel.

Installing KeelEazy is actually really easy. You can choose to protect the entire keel or just the bow and stern areas which receive the most abuse. KeelEazy comes in seven different colors!

1. Black
2. White
3. Orange
4. Blue
5. Green
6. Red
7. Yellow

It also comes in different widths however 2″ is the best for most kayak applications.

Install Video:

KeelEazy Installation:

I opted to install the Keel Guard on the entire length of the keel. I ordered 14 feet so there would be a little extra just in case. Overall length of the Kilroy LT is 12′-11″.

Step 1: Clean the entire keel area with a clean rag and rubbing alcohol. Let dry. Level off any existing scratches with a razor blade.

Step 2: Round off the beginning edge. (This is not in the video) By folding the edge in half length wise and cutting an arc out it will round off the leading edge for a cleaner look after installation. This is optional.

Step 3: Using a razor blade peel back the protective backing.

Step 4: Place the sticky side down starting 6″ min at the bow. Roll it out and remove the backer keeping the keel guard sticky side down. Keep centered on the keel.

Step 5: Warning: Do not apply too much heat. If you burn the keel guard you will need to replace it with a brand new piece.

Step 6: Using a heat gun slowly heat and mold the keel guard to the bow and the curve in the keel. Using a roller or round tool work out the bends and kinks.

Step 7: Continue using the heat gun in small areas heating up the keel guard and pushing it down. You may want to use a glove because it can get pretty hot.

Step 8: Round off the stern edge.

Step 9: Repeat heat and apply.

Complete!

KeelEazy is available as a Kit or per by the foot from The Kayak Fishing Store.

Disclaimer:

Installing aftermarket products may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.

YakAttack LeverLoc install on Jackson Kayak Kraken (Permanent Install)

The Jackson Kayak Kraken being 15′-6″ long requires the use of pad eyes to guide the long anchor trolley. YakAttack has created a kit along with a locking feature so there is no need for clam cleats anymore. Low profile and a top of the line anchor trolley rigging solution.

The YakAttack Leverloc install on Jackson Kayak Kraken is pretty simple given the amount of access to the inside of the hull. In this article I will cover the YakAttack Leverlock HD kit & system.  The kit includes additional backing plates to make the pulley anchor points more rigid.

In the kit you will find the following:

YakAttack LeverLoc HD Kit

1. Anchor Trolley Line
2. (4) Pad Hooks
3. (2) Harken Pulleys
4. LeverLoc and Housing
5. Trolley Ring
6. (3) backing plates with rigging bullet capability
7. Mounting Hardware

Tools Needed:

1. Drill
2. Screwdriver
3. Lighter
4. Center Punch

First check that the kit contains all parts you will need.

The included instructions are well written in a step by step fashion to guide you through the installation that best fits the application.

In this install we will be drilling only 2 holes at the pulley locations as with the Jackson Kayak Kraken there is ample inner hull access to these areas. On the (2) three hole backer blocks look for the word pulley. these are the 2 holes we will be fastening to.

The LeverLoc may be installed on either side of your kayak and is purely your discretion. Typically fishing with conventional rods and reels my preference is to install the anchor trolley on the left side of my kayak. Due to being right handed I tend to fish from the left side of the kayak. This allows me to control my fishing rod better and land my fish easier. Also being right handed the control of the line and LeverLoc is overall easier.

1. Pulley Install:

Choose a location 12″ back from the bow above the waterline. Using a center punch mark the first hole and drill. Now mount the pulley using the black 1″ 10-32 bolt in the first hole drilled. Tighten into the backing plate but do not tighten completely. Now level the pulley and mark the second hole location in the center of the pulley mouthing point. Pivot the pulley and backing pate out of the way and drill the second hole. Fasten the second bolt to the backing plate and tighten. Repeat the same steps for the rear pulley.

2. LeverLoc & Clamp Base Install:

Now for the lever lock. The Kraken does not have a way to access the inner area of the kayak for this location. Select the location within reach from your seat but not where your paddle sweep will allow your hand or the paddle to hit. The screws provided will thread into the plastic without worries of them working out or leaking.

3. Trolley Line:

Tie an overhand knot in the end of the paracord after running it through one side of the ring. Now run the paracord through the bottom of the bow pulley then the top of the stern. Make sure you run it from the stern up through the pulley then through the Clamp Base  then down through the front pulley. Tie off the ends to the trolley ring. Make sure there is no slack in the line.

4. Pad hook Install:

For locations where the paracord line rides up the gunnel you will install the pad hooks. The top line will run through and the bottom will clip in the bottom hook. Evenly spacing 2 at the stern to the center and 2 from the bow to the center seems to be the best placement.

5. Tie off
Tie the tag end of the trolley line to the ring using half hitches. Cut the remaining end but leave about 3 inches for future adjustment.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.