One of the most unique places in the United States is Assateague Island. Located in both Maryland & Virginia the barrier island is home to hundreds of feral horses. It all began in January 2017 when in a conversation with Joe Hosler about doing a Kayak Fishing Excursion there. Not knowing the area it was tough to pick a date but we picked what worked out best for the two of us. I then figured it would be nice to extend it to fellow kayak anglers. A post on facebook and an enormous amount of interest followed. The date was set for June 9 – 12 as still in the spring the hope was for a less buggy experience.

Assateague is said to have the second highest mosquito populations just under the Everglades in Florida. Insect repellent with deet is highly recommended. The camp is set up for tenting camper or RV but has no hookups. It’s amenities include an out house with cold showers but its a  great trade off for the outdoor beauty the park provides.

Assateague Island National Seashore Park Kayak Fishing Camp

This was the first run while personally never visiting the park had no idea what to expect. For this reason the car camping was our best bet. There are many factors while wilderness camping that can make it a good trip or a tough one weather conditions being a main one. Rain can be one of the worst. Even in the summer things will not dry in humid places making the adventure cold and risky. “Backcountry Camping” at Assateague the closest camp in Maryland varies from 2 1/2 to 13 miles away from the ranger station.  No fresh water is available at the back-country sites so paddling in water would be a must.

Car camping as opposed to wilderness camping is much easier while weather is still a factor it can be overcome easily. The amount of gear you have with you is not limited to what you can take in your kayak. So for those reasons car camping was the way to go on the first run at Assateague. Campsite reservations fill up quickly at the park so planning out dates happened well in advance. I booked 2 sites in January which can hold up to 6 campers 2 tents and 2 cars.

Friday:

Assateague Island National Park is located in Maryland about an hour south of my home. Ricky took the drive from Philly and crashed at my place the night before. I was waiting on a special delivery from Torqeedo of a Sunshade 50 solar panel for charging the Torqeedo battery. It was amazing as it arrived at the moment we are hitting the road!

The Road to Camp:

Fortunately the camp is only an hour from my house so we were there in no time. We stopped at Buckys bait and tackle shop for bait and also got a flounder sandwich for lunch.  Ed and Noriel were already there and set up by the time Ricky and I arrived. Dee and Kelly were also already there so we set up our camp. We needed firewood as the park states you cannot bring firewood from out of state.

Its pretty neat as the Assateague road in there are about 20 different places that sell firewood both honor boxes and salesman. After loading up on wood we and then hit the water. In search of flounder and set up with crapping handlines we fished and crabbed until the evening. Suddenly Ricky had a fish on. It was a small striper. Who knew. Some time went by and I started catching them on the buck tail and gulp.

One after another 14 in all which was followed by an amazing sunset.

Right after the sun past the horizon horses crossed the water from sod banks which they were grazing on the salty grass during the day. The full moon raised above the trees at that exact time.

We did a bit of grilling back at camp. Some sausages that Noriel brought. It was late due to the long days and no one really felt like cooking. We then all went and crashed out only to be awoken at 2:30 am by other campers setting up and being very inconsiderate. Ricky said something to them and they didn’t care. We figured in the morning since they packed up quite early that they were not supposed to be camping there to begin with.

Saturday:

Waking up around 5:30 to await Jeff Little’s arrival and to cook up some breakfast.  The mosquitoes that were caught between the screen dome and the rain fly of my tent were still trying to eat me alive. The dash to unzip the door and run to the concrete or become breakfast to the blood suckers. Well I made it. The other guys were just getting up also. I started cooking bacon and eggs for everyone. Jeff arrived and ate with us. We filmed a short video on the Torqeedo Sunfold 50 Solar Charging Panel.

Convoyed up we drove off the island to South Point which lies on the west side of Sinepuxent Bay. Launching at a boat ramp we learned the water was colder than that closer to the island. It was funny because it probrably took us about 20 minutes to drive to the boat ramp while it was only 1.8 miles from the Assateague Island Drop in.  Water was deeper in this are a reason we went there but couldn’t find a fish the whole day. Resorted to crabbing and caught mainly females which is illegal to keep for dinner in Maryland.

Jeff was able to get in a bunch of footage for the Torqeedo video. I covered how to use the Torqeedo motor while flounder fishing. Making new drifts wind tide etc. It does save from a lot of paddling throughout the day. Then went onto hand lining from a kayak for crabs. Technique bait, and how to anchor. All great information which I will post up on my blog when I get around to it! Everyone ended up giving up around 2 PM and headed back to camp for dinner. Becky, Ricky’s wife had prepared  chicken and veggies for grilling! Good thing I brought the Camp Chef cook op and grill top.

We did manage to get out again in the evening for the bass again. Wasn’t as productive as the evening prior but did catch a few.

Sunday:

The attempt to sleep in was impossible due to the fact the sun was beating on my tent. The heat was becoming intense. Ricky was leaving soon and so were Kelly and Dee. Jay Sav had to leave Saturday unfortunately due to a family emergency. Ed Noriel and myself decided to fish where we did the evening before and try some crabbing there also.  Crabbing was very slow and almost uneventful. Only a strange thing happened. I had a small bunker on one of my crab stringers. Suddenly it was pulled really hard and the bait was gone. What could have that been…

Couldnt say anything for the fishing. Didn’t even have a hit but next time i will throw a bunker on and let it sit on the bottom. We all were bored and decided to head back to camp around 1 PM. I was able to set up the Torqeedo Sunfold 50 to get a gauge on how much battery it would charge in a certain time. Realistically its 50 watts of charging so it will charge a full battery over the time of 2 full days of sunlight.

We had leftover chicken sandwiches for lunch and I cooked the steak for dinner. We were all sort of beat and didn’t go out fishing on the last evening. A heard of horses came through camp in the late afternoon.  They just walked through feeding on the tall grass not minding ours or other campers presence. Then they rummaged through a neighboring campers trash. Its bad to leave trash or food out at the camp. Horses are not built to consume human or other animals food. They eat grass.

I went down to the beach for a clear sunset. We had our last campfire and the wind in that campsite again saved us from the mosquitoes.

Monday:

Well it was an early wake up again. This time to pack up and head home. This was a very enjoyable few days of doing what we love best. Camping, Fishing, and hanging out with good friends. This will most likely become an annual trip for us. All are welcome to join. Please do! Hope to see you all next year.

Living right on the Indian River bay has some advantages. After work I can now get out on the water for a little while. I took advantage of this on a Friday April 5th 2017. This day was special because I was able to catch one of southern Delawares Phenomenal Sunsets.

It was a chilly breezy evening and wanting to get out and see if I could find some stripes (Striped Bass). Dropping in out of Pot-Nets Seaside Long Neck put me closer to the Indian River Bay Inlet. I figured this would be a good area to find Striped Bass due to its proximity to the ocean. The wind was out of the south east and man was it blowing. Had to be 15 – 20 producing over 2 foot white capping waves. I headed out using the Torqeedo and went across to Burton Island where I was hoping to be shielded a bit. Well that didn’t work. So I made a few casts to the shallow water and where it dropped off. Casting a jig with a paddle take soft bait. My fish finder was clear of fish marks.

Another point was to get out on the yak while also scoping out and mark areas that id think flounder will hold in the spring time. I located a few good drop offs from sandbars and marked them in the Lowarnce Elite 5TI. Soon it will be time to jig these areas and hope for decent sized flounder! In the spring time the big flounder typically come into the back bays to spawn in the shallow grassy waters.

[wds id=”12″]

By now it was getting dark and due to the overcast I didn’t think there would be a visible sunset. To my surprise in the distance on the very edge of the horizon there was an abundant orange glow. A few minutes later the sky lit up bright yellow and red. Reflecting off the water the hues filled the bay and the surrounding landscape. This was one of the best sunsets I have ever seen from my kayak seat!

YakAttack LeverLoc install on Jackson Kayak Kraken (Permanent Install)

The Jackson Kayak Kraken being 15′-6″ long requires the use of pad eyes to guide the long anchor trolley. YakAttack has created a kit along with a locking feature so there is no need for clam cleats anymore. Low profile and a top of the line anchor trolley rigging solution.

The YakAttack Leverloc install on Jackson Kayak Kraken is pretty simple given the amount of access to the inside of the hull. In this article I will cover the YakAttack Leverlock HD kit & system.  The kit includes additional backing plates to make the pulley anchor points more rigid.

In the kit you will find the following:

YakAttack LeverLoc HD Kit

1. Anchor Trolley Line
2. (4) Pad Hooks
3. (2) Harken Pulleys
4. LeverLoc and Housing
5. Trolley Ring
6. (3) backing plates with rigging bullet capability
7. Mounting Hardware

Tools Needed:

1. Drill
2. Screwdriver
3. Lighter
4. Center Punch

First check that the kit contains all parts you will need.

The included instructions are well written in a step by step fashion to guide you through the installation that best fits the application.

In this install we will be drilling only 2 holes at the pulley locations as with the Jackson Kayak Kraken there is ample inner hull access to these areas. On the (2) three hole backer blocks look for the word pulley. these are the 2 holes we will be fastening to.

The LeverLoc may be installed on either side of your kayak and is purely your discretion. Typically fishing with conventional rods and reels my preference is to install the anchor trolley on the left side of my kayak. Due to being right handed I tend to fish from the left side of the kayak. This allows me to control my fishing rod better and land my fish easier. Also being right handed the control of the line and LeverLoc is overall easier.

1. Pulley Install:

Choose a location 12″ back from the bow above the waterline. Using a center punch mark the first hole and drill. Now mount the pulley using the black 1″ 10-32 bolt in the first hole drilled. Tighten into the backing plate but do not tighten completely. Now level the pulley and mark the second hole location in the center of the pulley mouthing point. Pivot the pulley and backing pate out of the way and drill the second hole. Fasten the second bolt to the backing plate and tighten. Repeat the same steps for the rear pulley.

2. LeverLoc & Clamp Base Install:

Now for the lever lock. The Kraken does not have a way to access the inner area of the kayak for this location. Select the location within reach from your seat but not where your paddle sweep will allow your hand or the paddle to hit. The screws provided will thread into the plastic without worries of them working out or leaking.

3. Trolley Line:

Tie an overhand knot in the end of the paracord after running it through one side of the ring. Now run the paracord through the bottom of the bow pulley then the top of the stern. Make sure you run it from the stern up through the pulley then through the Clamp Base  then down through the front pulley. Tie off the ends to the trolley ring. Make sure there is no slack in the line.

4. Pad hook Install:

For locations where the paracord line rides up the gunnel you will install the pad hooks. The top line will run through and the bottom will clip in the bottom hook. Evenly spacing 2 at the stern to the center and 2 from the bow to the center seems to be the best placement.

5. Tie off
Tie the tag end of the trolley line to the ring using half hitches. Cut the remaining end but leave about 3 inches for future adjustment.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.