Yak Chum’s Personal 2014 Cuda 14 in detail:

2014 Jackson Kayak Cuda 14 Custom Color

Rigging:

Yak Attack 12″ GT90 GearTrac both sides.

Modified factory smarttrack Rudder to accept Sealect Designs Tru-Course rudder.CUda on beach copy (Medium)

Anchor Trolley installed.

Gear track installed at rear for camera mounting.

Custom skid plate transducer mount installed.

Rigged for Lowrance Elite 5 Fishfinder series.

 

Paddle Used:

Aquabound Spin-drift Carbon w/ telescoping ferrule 335 – 350 cm

The Plastic Hull’s Spindrift Carbon Review

Accessories Used:

Lowrance Elite 5 HDI Sonar/Chart-plotter Unit

Standard Horizon HX290 VHF Radio w/ External Speaker Mic

12 volt battery in DIY Waterproof Battery Box

Ram Mounts  X Grip for Smart Phones (Mounts my Samsung Galaxy S5)

EcoXGear – EcoRox Waterproof Bluetooth Speaker (Ram Mounted)

Yak Attack Visi Carbon (Flag with Light)

Ram Tube Style Rod Holders

Milk Crate & Crate Pack w/ 3 Extra rod holders

Various Camera Mounts (Typically two at one time)

C-Tug with Mullet Miller Conversion Wheeleez

 

Understanding Kayak Rigging – Mounting Base Options

Mounting bases are an essential part of rigging and personalizing your fishing kayak for your needs. A mounting base is typically and after market install for adding mounts for rod holders, fish finders, and other personalized accessory’s.  In this article ThePlasticHull.net covers basic and typical mounting hardware and bases along with track systems.

Fasteners:

mounting hardwareThere are 4 main types of fasteners typically used for rigging plastic kayaks.  They are as follows.

  1. Thru Bolt: (Best Mounting Solution. This includes metal backing plates used in track system mounting.)
  2. Rivets: (Second to the best method)
  3. Well Nut & Bolt (Typically used with no inside access)
  4. Self tapping screw (Has its uses)
  5.  Factory molded threaded inserts (Becoming more common. Standard on Jackson fishing Kayaks)

 

Accessory Bases:

These fastening methods are used to install a mounting base. Depending on the accessory there are choices on base options. For a long time mounting a spline base or a flush mount spline base was the best method of installing rod holders and safety flags. With the evolution of kayak fishing and innovative accessory companies like Ram Mount,s Scotty, and Yak Attack new mounting options have been invented. To cover a few of the main mount base options.

  1. Scotty base
  2. RAM Ball Base
  3. Rail Blaza Deck Mount Base

 

Gear Tracks:

The most widely used deck mounting solutions in recent time are track mount bases. Track mounting works just like track lighting. Simply by turning the accessory it can be located and secured in any location on the track desired.  I believe Wilderness Systems were the first to incorporate track mount systems into their fishing line of kayaks. Luther Cyphers of Yak Attack developed first the mighty mount which accepted a T style bolt that also is compatible with a track system.  Later he developed the gear track. The gear track really made rigging possibility’s endless. Also created the ability to slide accessory’s to different positions on the fly.  For paddlers the ability to move rod holders out of your paddle sweep on the fly.

In recent time many other fishing kayak manufacturers are incorporating the Yak Attack Gear track or similar track system into their fishing line of kayaks. Along with the tracks came “T Bolt Accessory’s” . The Screw ball was one of the first solutions for mounting accessory’s to the tracks. The ability to have a RAM Mount accessory on a sliding track made options endless. From mounting Rod Holders to Fish finders and camera mounts.

Scotty and RAM Mount spline bases can be adapted to work with track systems by utilizing the Yak Attack MightyMount Post Mount kit. Check it out here!

For 2015 Yak Attack has done it again with a new innovative track system that enables mounting accessory’s from any point on the track. No more sliding from one end to another. Mount between already mounted accessory’s! This is going to make it easy!

 

For more information on GearTrack Mounting Hardware go to YakAttack.us!

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.

The 5th annual Kayak Fishing Jamboree was a special one for me as Friday October 24th was my birthday! I departed late morning for the 2 hour drive down to North Wildwood. Upon my arrival in picking up bait was on the top priority list. After purchasing 2 packs of clam 2 packs of frozen mullet and 2 doz green crabs running into friends of mine whom had just met up to go back out fishing. The decision to join them was an easy one. I slid the Big Rig off of my truck loaded it up with a heavy rod for Tog fishing and took along a half a dozen green crabs.

2104_10-24-fishing collage (Large)

Tautog feed along structure. Their diet consists of crabs mussels barnacles and other critters with hard shells. To rig up a green crab you will need a Tautog or Blackfish rig. You can tie your own. I typically buy them since they are pretty cheap. The rig can be a single or hi low rig with a loop or a snap swivel at the bottom for the sinker.  Each green crab can be cut in half to make 2 baits or even the larger ones can be quartered. To get them on the hook you will typically cut the legs and claws off and feed the hook through one of the leg sockets then turn the hook around and bury the tip within the bait. This seems to be most effective and the bait stays on the hook better.  Fishing around structure such as rock piles jetty’s and bridge pilings poses a challenge. These fish are experts of stealing bait snagging you up in the structure and de-hooking themselves! The best way to keep them from diving between rocks and crevices is set the hook and reel in slack as fast as you possibly can! These fish fight hard so a heavy rod with a reel with a fast retrieve is best!

20141025_070244After about an hour and a half catching a half dozen fish at the bridge the tide begun to slack up. I rode the tide out the the inlet break wall. The break wall is a great location for catching Tog. At slack tide we are able to boat keeper fish for every boat. This time of year the New Jersey fishing regulations only permit one fish per man at 15″ min.

Fishing the Cape May area is always a challenge. In the fall typically the lunar tides are more current and higher rise and low fall. This year the event fell right on a New Moon. Just before the tide went slack riding the outgoing to the southern rock wall of the Hereford Inlet. Ended up fishing the area with 5 fish under 15″ for about an hour.  Once the tide swung and the incoming started it was around 4PM by now. It was time to load up to attend the captains meeting at the campground for 6PM.

After signing in purchasing calcuttas and receiving a captains bag Charlie ‘Lunchbox’ LaBar explained the rules and answered questions. That wrapped up around 7:30 and I joined friends Val and Shawn for dinner at a local diner. The decision arose to fish or not to fish at night. After all it was my birthday so the decision was made to hang out with friends and go fishing early in the morning.

Saturday

raffle tables 10-25-14 (Large)Arriving at 5:00 AM for the drop in at cape may inlet with Lunchbox. The tide was incoming. Launching and the 2 of us having minor motor problems we headed out into the inlet trolling Tube n Worms. The tide was ripping in and i had the throttle at 75% just to hit 1 kt. Lunchbox had his maxed out. It took us an hour to get to the  beginning of the rocks. At this point lunchbox was having problems with his electric motor and told me to continue out to the ocean if i wanted to. So an hour later i made it out the inlet where i found wind and 2-3 foot waves. Not marking any fish and drifting way too fast after an hour it was un-fishable without anchoring. Also I was worried about the tide switching to the outgoing while being outside and not being able to make it back in. With that in mind heading back in the inlet and back to the bridge at the drop in within 20 minutes. Drifted some clam on the way back in and as the tide slacked up and it was time to fish for Tog at the bridge.

The Tog bite begin slow for me. The slack tide lasted about 20 minutes and it was time to hold on again. one leg up on the bridge piling. After landing 3 tog all 13-14 inches and loosing a few i hooked up with a keeper! 15.25″ dinner! By this time the tide was ripping hard and the it was time to call it a day.

Loaded up and headed up to where a majority of the attendees were fishing. Reports of some striped bass a good amount of Tog were said to be caught. Heard a story of a few yakkers being sucked out the inlet and one getting run over by a boat. Most of the better fishing ended up to be in the back in small creeks and on the flats.2104_10-24-dinner and awards

Back at camp Captain Jim was frying up some Tog that we caught! It is one of the most excellent table fare that comes out of the north east salt. After cleaning up  Val and I went to hang out with Capt Jim and a wait the dinner.  At 6:00 we went up to the “rack”s which is a large storage building and makeshift hall type of shelter for a seafood pasta and roast beef dinner. Both are excellent and many look forward to the meal. It has been the same food since 5 years ago when the Jamboree was started by Jersey Cape Kayak Fishing and its crew. This year there were a total of 106 registered anglers!

After the dinner the raffle began. All proceeds from the raffle including the real tree Ellie kayak benefited the NJ Heroes On The Water Chapter.  This event completely funds the chapters gear. Including kayaks.

Needless to say I never win the raffles. I ended up winning 2 times on this one!  Won two nice bomber lures and a nice bomber hat also a T shirt that I gave to Shawn. After the raffle we went back to the cabin and walked over to where a few of our friends were staying in the cabin I stayed in last year. Hung out with them for a bit. A bunch of people came over a shot of cake vodka and a few beers to celebrate what would be the end of most kayak anglers season.

Sunday was too windy to fish so we slept in till around 8:30 then packed up checked out and went to breakfast. After breakfast it was the drive home. Till next year!

 

 

2104_10-24-friends collage 2 (Large)

Page 8 of 16« First...678910...Last »