Camera Float Life Proof Phone Case Tether

So you purchased a Life Proof case for your phone Now its protected and waterproof! Only problem if you drop it overboard it will sink like a rock. I came up with a simple solution the use of a GoPro tether and a camera float.

GoPro has a 3M sticky back tether product used to tether a GoPro to helmets and surf boards and such. The 3M adhesive is very sticky and will just about stick to anything.

How to install. Simply stick the tether to the back of your phone. In an area that will not interfere with phone mounts. After this installation the phone will not sit flat but its better than loosing it.

You can find the GoPro Tether on Ebay!

Also find the Floating Camera Strap Here!

Fishing Journal 2015_07-11:

The Sunshine Foundation Fluke Tournament 2015 came upon me with no real warning. I had my dates off although my calendar displayed the correct date. Along with other big changes going on at the moment in time it was easy to mess up the dates.

The plan was to stay at my friend and fellow kayak anglers camper which is located 20 min from the tournament spot. Leaving Friday afternoon after 5 hours of work. The decision to take all back roads to Egg Harbor proved to be a good idea and also was nice to take roads through areas in NJ I have never been. Most people think New Jersey is an entire state of industrial companies and polluted but there is a higher percentage of Jersey that is farmland and old colonial style towns.

Going straight to the captains meeting since being unable to get there until 6:30 Eric Chamberlain and his son Brandon were there. I went in and registered and received a T-Shirt and a captains bag. Then it was back to Ricky’s camp. Eric made dinner in a dutch oven consisting of beef potatoes carrots and broccoli calling it cave man food. It was decent. Someday I will own a dutch oven.

The alarm went off at 4 am. Ricky had coffee going and he made us all an awesome breakfast with scrambled eggs bacon and potatoes!. Great way to start a day of fishing hard! Then we were off. We drove down a pretty much single lane road through all of the marsh and over wooden bridges. I had never seen anything like it in NJ.

At the drop in we just backed our vehicles to the water and dropped the kayaks right there. After launching i decided to try a little jigging right at the ramp. First cast fish on! It was a short fluke coming in at 15″.  Fishing wasn’t really that great. It was pretty windy all day.  By the end of the day Ricky had 6 shorts and i had the same of 6 short fluke landed. Nothing close to a keeper.

On the way back I caught a few blue claws of really nice size just hanging on my jig! We fished 7 hours and the outgoing tide and part of the incoming.

Around 2:00 PM we headed in. Drove back to camp and hung out for a little while before heading over to the awards BBQ. The food was decent. It included Pulled Pork Sandwiches, Burgers, Dogs, Corn, and watermelon. They were selling a nice beer glass for 5.00 which included free refills of coors lite. The awards were handed out and no kayakers all 13 of us entered drum roll. No Fish! The tricky tray prizes were insane!

After the awards dinner we went back to the camp and I hung out with Ricky and his wife Becky. Ricky and I took a walk around camp. Showing me around  some really nice spots. The sunset photo is from a point on the Mullica River. Chips Folley Campground is a really beautiful place. Its one of those hard to find Gems of New Jersey. 

Ricky and I had planned on going fishing again in the morning but he was pretty spent. He had a guide service on Friday and now had fished all day Saturday in the tournament.

I feel this tournament was well put together. I was surprised there was only 13 kayakers registered in the tourneys 4th annual. Its fun to fish new areas and especially with good friends!

The Jackson Kayak Big Rig due to its width a full length anchor trolley will ride up the side of the rod trough. This article explains the benefits and how to install a Split Anchor Trolley System on the Big Rig.

The definition of an anchor trolley is a loop of rope mounted to a kayak via two points which allows control of its anchoring point from the seated position. Essentially functions like a clothes line.

A split anchor trolley system is actually composed of two separate anchor trolleys. One located on the starboard side and the other located on the port side. One from the seated position to the bow and the other from the seated position to the stern.

The benefits of the split anchor trolley set up are the ability to anchor from two points at one time eliminating spinning of the kayak. Other benefits include a shorter loop is less invasive.

Things you will need:

• 4 Pulleys Stainless Steel
• 1/8″ bungee – Color of choice
• at least 30 feet of reflective 5/32″ poly rope or para chord
• 1 Pad Eye
• 2 SealectDesigns Deck Fitting – Double Loop
• 2 Nuts bolts and rubber washers.
• (2) 1 1/4″ Nylon Rings
• 2 Carabiner’s with eyes

DIY Install:

This install is currently set up for Stake Out Poles. For a bottom hook anchor system you will need additional cleats not mentioned int his article.

You will need to decide which side you would like the trolley to be on. Either left on the bow and right on the stern or right on the bow and left on the stern.

The front trolley will require drilling of a deck loop.I installed mine just under  the front of the rod tip protector. Previously using the screw in the front of the rod tip protector proved not to work correctly. The line rode up the side of the boat. Using the deck loop corrected the problem. To install that you will need to drill and using the 2 stainless bolts neoprene washers and nuts secure it to the boat.

To install the Sealect Designs Double Deck fitting simply remove the screw of the side handle at the center of the kayak (near the seating position). Slide the deck fitting and with a little Lok Tite refasten the screw. Do this for leash points as stated in the previous article!  This will allow you to clip the carabiner. The other side is for leashing rods and gear.

Using the shock cord about 12″ for each pulley tie a double overhand knot after running through he handle deck loops in all four positions. You want 6-10″ of looped shock cord as this will absorb the pull of the anchor.

Once the pulleys are tied in place one to the bow on the Deck Loop with the shock cord. Now run 2 lengths of the the poly rope through the pulleys you want the tag ends to be at the bottom. You will now tie using half hitches to each side of the nylon ring. I like to use the poly rope or para cord with the reflective band weaved in. It adds a length of visibility at night.

Once all ends are tied to the rings burn the ends so the rope does not unravel over time.  The system is now complete. Leave a tag end to adjust in the future as the rope weathers it may become slack. Simply retie. After fishing in salt water do rinse down the systems just to keep them moving through the pulleys and the rope will then last longer.

Tight lines!

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.