Fishing Journal 2015_08-21

jersey TrafficUtilizing a 1:30 PM Friday departure from my day job I set out to arrive down the shore at Chips Folly Campground. Joining Ricky and his lovely wife Becky for a fun filled weekend of camping and Kayak Fishing Great Bay and the Mullica River! Having a few extra things to pack I was able to be on the highway at 2:30 after grabbing a sandwich and coffee at the local convenience store. Hoping to escape the dreaded Friday shore traffic following Waze. A major set back of living in the northern part of New Jersey is the hundreds of thousands of people that head south on the Garden State Parkway to the shore points. The 100 mile ride down wasn’t bad at all with pockets of traffic but not too bad. I ended up being early so decided to stop and pick up some snacks and drinks on the way.

Arriving at Chips Folly Campground stopped at the camp office to check in and as soon as that was completed Ricky and Becky pulled in. Perfect timing! Soon after we went out for dinner. Ricky and I had pizza which was really good. I haven’t had pizza on over a year. Becky had sausage and peppers which looked amazing! After we finished eating we went back to camp hung out for a little while and went to bed early in preparation for an early day of fishing. Although the wind forecast was not looking to be in our favor we were to go fishing anyway even if we were to cut the day short.

Saturday Morning:

The arrival at the beach around 6:00 am the sun was rising. I brought my new Beach SunriseCanon Dslr with me and took a few snaps in the morning at the beach. A breezy but beautiful day had begun! Ricky and i started fishing top water lures first. We found some action with bait schools scattering and jumping. The Stripers were present!

Rod & Reel Setups:

The rod and reel setups i was using for the day consisted of a Spinning Setup and a casting setup. The spinning gear was a 7′ St. Croix Mojo Inshore Medium Power with Fast action Spinning Rod paired with a Shimano Spheros 3000 reel spooled with 20# power pro spectra in green. The casting setup was a custom 7′ Bull Bay Tactical 20# Medium Heavy Power with Moderate Action Casting Rod with Fuji K guides and an Abu Garcia Revo Inshore low Profile Casting reel spooled with 20# Cortland C16 Spectra Braid in lt blue color.

Tackle:

The Spinning rod was set up for top water with spooks poppers and plugs. The casting rod was set up with a Chartreuse DOA C.A.L. – Jig Head – SHORT – 1/8 oz. & 3″ C.A.L. Shad Tail with a pearl body and Chartreuse tail.

Fishing in 3-5 feet of water casting towards the bait fish had a few hits on the spook and popper. Changed over to the soft plastic couple casts and bam fish on!

[wds id=”8″]

 

A nice 24″ Striper! Got my pose in and released him back into his natural habitat. Not exhausted at all swimming away with a flick of the tail. As the day went on the wind stayed 5-10 sith some gusts of around 15. Overall not a bad day. We called it quits around 1:oo PM with only the one bass caught and  a few missed.

fire setup at ricksBack at camp Becky had made a banging German Potato Salad and some salmon burgers for us! We devoured that then it was time for a power nap. I got about an hour and a half which was real nice. Ricky slept till 5PM. While he was sleeping I took it upon myself to assemble a fire before it got dark.

Ricky and I took a walk with our cameras in hand to photo the sunset! There is a point that juts out into the river which is the perfect spot for shooting photos of a sunset. Becky cooked dinner while we were out walking the dog and snapping photos.

swesome sunset chips foly pointfire at ricksDinner was excellent Becky made up chicken and veggie kabobs and rice. We enjoyed the fire and when it died down it was time for bed and an early rising at 4:30 AM to find the Bass again. These times now enjoying entire weekends away from home I feel the true feeling of freedom. There’s nothing else really like it.

Sunday Morning:

4:30 AM comes quick.  Up and out stopping at Wawa for a quick bite to eat. We were able to drop in before sunrise. This we believed would yield a better Bass bite. The winds for the day were 5-10 N-NW which was to be lighter than Saturday.

IMG_1336 (Large)Meeting Al ‘Yakman’ Stillman and his son Jake at the drop in. All setup with his tandem Hobie AI on the beach and ready. We dropped in and immediately started searching for bass pressuring bait fish. Fishing began pretty slow. The fish we found were finicky. By this point in time Al gave up and went sailing. I was feeling exhausted but eventually Ricky hooked up! He had a nice striper. IMG_1342 (Large)About an hour later Ricky Hooked up again with a smaller Bass but still was a good day.

After a little break and a PB sandwich Croakers were on my mind! I went to deeper water to find some. I had a few hits but it was slow. Ricky came over and guided us towards even deeper water. IMGP1361-2Using a Fish Finder rig with a high low hook 1/0 Gamakatsu bait holder hooks and red beads a rig I had whipped up in Delaware baited with small cut pieces of beach clam i managed to find a Croaker! A rather nice one!  They were hard to find but managing a small Porgie around 9″ a bit later.

By this time the wind had shifted to a NE 10-15 out of our direction to the drop in. Managing to tow Ricky in most of the way while being soaked by the water thrown off his kayaks bow. The Torqeedo was a paddling for hours saver on this one!

It was a great weekend of fishing even though fishing wasn’t the best. Being out on the water with friends and good company is the real reward. I’m hoping for a few more weekends like this until the weather turns cold.

RAM Camera Mounts:

RAM_Logo_whiteRAM Camera Mounts for kayaks are some of the best mounts on the market for mounting to a kayak. Like most other mounts RAM has adopted the YakAttack Gear Track System for some of their mounts and being that the RAM ball was developed. RAM mounts are made in the USA and carry a lifetime warranty.

Ram Flex Arm:

One of the best stationary camera mounts I have used. The unique aluminum rod is easily malleable to bend the shaft in different directions. The rod is rigid enough to hold position. IT does take a bit of force to bend the rod into the desired position. Along with the RAM ball top which you can add YakAttatack or Ram extensions. The Ram flex arm is easily mountable with a flush mount or a track mount system.

RAP-B-200-1-TRA1-18U With Gear track base

RAP-B-200-1-386-18U With flush mount base

RAP-B-200-1-114P-18U With post spline mount quick release (mouthing base not included)

RAM Composite Flat Surface Mount with Custom GoPro® Hero Adapter:

Much like the YakAttack Panfish Portrait, besides the swivel ability this mount is handy for low profile mounting to a track or flush mount. The mount is inexpensive compared to others that have the same function. This mount can also be created if you already have the GoPro RAM ball adapter and a 1″ base mounted or screw ball for track mounting.

RAP-B-138-GOP1 $24.59

This mount can also be paired with accessories like the RAM Tough-Claw™ for mounting to railings or the RAM Tough-Clamp™ for clipping to anything else. The Tough clamp is great for quick camera angles.

Ram Medium Tough Claw RAP-B-404U $35.80 (these vary in size from small to large)

Ram Tough Clamp RAP-B-397-2U $21.02 (these vary in size from small to large)

RAM Telescoping Pole Mount:

This is one of my favorite cam mounts from RAM. One end of the mount clamps to a broom stick or telescoping painters pole. Personally I attached one to a telescoping boat hook with over 7′ in distance! The other using a RAM link and the 1″ RAM ball for GoPro or a 1/4-20 threaded ram ball connects to your favorite action camera.

RAP-B-218-1-GOP1U $24.94

 

filtersGoPro filters are almost a necessity when capturing underwater or above water footage. The definition of a filter is a piece of glass secured over the camera lens to create image effects, balance, and enhancements. In the case of the gopro there are several filter options created. Being an action camera the GoPro can go into different environments. Filters can help enhance the raw video.

This article covers several available filters by Polar Pro that snap over the GoPro Hero 4/3+ housings.

Polarizer Filter:

The glass lens is easily installed/removed by pushing on and pulling off the standard GoPro housing. The polarizer is for use above the waterline.

Effects of the Poarizer are:

  • Great Reduction of Glare
  • Improved Color Saturation
  • Capturing Sharper Images
  • Includes storage bag and tether

The Polorizer is ideal for snow and watersports.

Magenta Filter:

gopro with filterThis filter is for use in capturing underwater footage. The new treated lens is 10x stronger than previous lenses. The magenta is Iridium Arylic which provides precise color correction in green tinted waters. Like the Polorizer lens the magenta lens is push pull on off the standard GoPro housing.

  • Green water color correction
  • Working depth up to 75 feet
  • Storage bag and tether included

Red Filter:

Like the magenta filter for use underwater but suited for color correction in blue water.

  • Blue water color correction
  • Working depth up to 75 feet
  • Storage bag and tether included

Neutral Density:

filter boxThis filter is more for fast moving video capture. It may be used for action shots from outside your vehicle to give a blur fast moving effect. The glass lens is for optimal clarity and like all of the other filters is a push/pull on of system. The Neutral Density filter is perfect for motorsports.

  • Slows down cameras shutter speed
  • Eliminates jello effect and wobble
  • Illustrates High Speed Movement

Macro Lens:

The macro lense is for close-ups. Like the Polorizer and Neutral Density lens’s it is all glass for optimal clarity.

  • 3.8x Magnification
  • Focus distance from 3 – 12 inches
  • Capture creative close up shots

 

Page 2 of 812345...Last »