Prior to going out on any event/tournament its a good idea to check the weather forecast prior to packing. This allows you to pack what you will important for the weather instead of packing everything. This time of year it is typically cold nights and cool days so preparing to dress in layers is the best way to go. It appears that this weekend is not going to be very cold but will be a bit windy. Therefor dressing for the wind will be important.

So now that know the type of gear and clothing I will need to bring the next step will be creating a list so forgetting to pack key items is a good idea. Being only 2 nights and a full day and a half of fishing its easy to pack light. All of my fishing tackle and rods are already packed due to previous fishing trips so that cuts out about half of things needed. It is fall so i will need to pack warmer clothing and my semi dry gear. Rule of thumb is water + Air temperature must reach a minimum of 120 degrees or falling into the water could be deadly without the protective dry gear.

I am also looking forward to using my Torqeedo as this is a special place with a 4-5 knot tide at fall new moon. Its going to be ripping and windy. challenge accepted! I will be targeting Striped Bass Blue Fish Speckled Trout and Tautog.

The Jamboree is held in Cape May NJ which is a two hour drive from my home. It is ground zero for some of the best Tautog fishing on the East Coast.

A nice drive south on the Garden State Parkway through the Pine Barens. Looking forward to meeting up with a lot of familiar faces and meeting new anglers! Im also looking forward to doing a little celebrating as today is my birthday!!

Hope to see you all there at the captains meeting tonight!

If not I will be on campsite 729.
For more information see http://jckf-forum.forumotion.net/

Was working on a few upgrades and repairs to the Big Rig today. Had these deck fittings from Sea-Lect Designs. I was trying to figure out a great location on the Jackson Kayaks these would work best. Well it turns out with a longer 1/4-20 screw it is adaptable to the existing handle threaded inserts without modifying the handles. This is a great place to attach paddle leashes rod leashes and fish stringers. The double loop deck loops work out great in this location if leave your rods leashed at all times. I tend to do this especially fishing saltwater where there typically is larger waves more rocking and a current.

Things you will need:

Sea-Lect Designs Deck Fitting Double Loop PArt# K736560-1 (Pack of 6)

1/4″-20x 1″ oval Head SS Screw (1) per every desired Deck Loop install

Loc-Tite Thread Locker

Instructions

Simply remove factory installed screw. Keep handle and washer at location. Using 1 Double Loop Deck Loop and 1 1/4″-20 x 1″ Screw thread screw through deck loop in center mounting hole. Dab a drop of Loc-Tite on threads. Tighten until tight. DO Not over tighten as it could cause the threaded insert to break its bond with the plastic of the hull and damage the kayak.

For the products listed in this article please visit http://www.sealectdesigns.com to locate a dealer near you.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.