Fishing Journal 2015_12-06 & 12-07:

Kayak Fishing December in South Jersey

With the unseasonable warm weather here in New Jersey many kayak anglers have been taking advantage of the extended fishing season. The striped bass are still around making their way south during the 2015 fall migration. Typically this time of year they have gone past the Jersey Shoreline and are into Delaware and Virginia. Also around still are the Tautog. So for the weekend the plan was to target both of these species from the kayak. On my way south again!

Although it is Unseasonably warm for this time of year dressing for warmth and safety are still a concern. The mornings temperature prior to sunrise are below freezing in the high 20’s but by 11 AM its border lining 50 degrees. For these trips dressing warm is important.

Dressing for the Occasion

On the base layer I am wearing hunting thermal bottoms and Under Armour cold gear compression top. Over the thermal bottoms i am wearing only Exofficio fishing pants and then Kokatat Tempest pants.  Top I’m wearing a wool shirt a fleece jacket and then Kokatat Tempest Dry Top. On the feet wool socks and then heavier wool socks to keep the feet warm! And a wool beanie under my wide brim hat. Dressing this way I felt actually warm enough to not use the Glacier gloves. If it were windy gloves would have been necessary and a wool face mask or neck gator.

Preparation for the next day
loaded on the trailer

Arriving to meet Ricky at Chips Folly on Friday night after work. The drive was pretty smooth making it to camp in 1.5 hours. It was already cold in the high 20’s  good thing Ricky already had a fire going to keep us warm. After catching up we proceeded to load the kayak trailer with my Jackson Kayak Big Rig and Ricky’s Native Propel. Loading our gear into Ricks car was to be easier than driving 2 vehicles.

 

 

 

 

 

Fishing Hard or Hardly Fishing

frosty big rig

 

The plan for the AM was to leave around 6:30 to North Wildwood for bait and then down to Cape May for Togging the inlet. We needed to be on the water no later than 8:30 AM to ride the tide out the inlet. Well in the morning the alarm didn’t sound and I awoke seeing it was beginning to get light out. It was already 6:30. Then it took 45 min to get out of camp due to the dog and various other things. We arrived at the bait shop at 8:00. We both made the decision to try fishing in N Wildwood due to the idea of not making the outgoing tide which is needed to make it out the inlet.

At the Kayak Fishing Store boat ramp we say Chris Parson, Charlie, and Rob were already fishing the bridge. When we launched they were done with that not finding a single Tog. They were off to go out on a rental motor boat to cover more water.

 

IMG_3509

Launch at The Kayak Fishing Store North Wildwood NJ

 

Ricky and I hit the water minutes after and headed straight out to the rock wall jetty’s within the inlet. The tide was just about slack which are prime conditions for togging this area. There were people fishing from the jetty’s which was different for me as I typically fish is area when one fish is allowed to be taken due to regulations. This time of year the ability to take 6 over 15″ attracts more fishermen to the shore.

IMG_3515

Ricky with a Tautog

It was a really slow day fishing with Ricky and I only landing one fish a piece. The day was beautiful and that enjoyment was welcomed. We tried just about everything. From plugging trolling jigging. There just weren’t any fish inside the inlet. The ocean was another story. Hundreds of boats were killing the striped bass. All day long hearing guys transmitting over the radio limiting out on Stripers. The inlet was too dangerous that day to pass on a kayak. The fish were in reach but these are the limitations of kayak fishing sometimes.

 

 

IMG_3554-Pano

A Panorama of North Wildwood

IMG_3567

Chris Charlie & Rob

 

 

We ended the day hanging out with Chris, Charlie, Rob, John and Kennith. Talking fishing and the sport while enjoying some pizza.Ricky and I left around 3:30 and went over to the Cape May Brewery where I purchased a growler fill of their Belgian Double called Devils Reach. We headed back to camp as the sun went down and the temperature dipped back into the high 20’s. Enjoying some brews and a nice warm campfire. The plan in the morning was to get up early and fish Oyster Creek.

 

 

 

 

 

Sunday:

IMG_3573Well my alarm went off and meaning to hit snooze I shut the alarm off. OOps. Ricky woke up at 5 and it wasn’t looking good to get to the spot prior to first light. THis was to be my first time fishing at Oyster Creek. It is a special place as it is an outlet from cooling the Oyster Creek Nuclear Power Generating Station. The water temp says a constant 55- 60 degrees all winter long making it very unique.

We left camp around 6 AM. It was a chilly 27 degrees but was supposed to heat up to around 50 degrees at noon. Arriving at the IMG_3577launch the fog coming off the water looked neat! Taking the tide out we reached where the creek dumps into the bay. Just before casting various lured 4 boats went by one at full power. Spooking whatever fish may have been there. Unable to find any fish we called it a day around 11:30.

I would love to fish there again preferably under the lights in the dark. From what i understand is the place is a Striper heaven. We stopped at a bagel place for a bite to eat then headed back to camp to winterize the camper and then head home. Prior to leaving I was able to capture some beautiful hues of the days sunset over the Mullica River.IMG_3668

 

IMG_3651-Pano

IMG_3675-Pano

 

DIY Kayak camera mounts were invented as kayak anglers and touring paddlers begun to capture photography and video of their trips to share their point of view with family and friends. With the affordability of waterproof cameras and now the light weight action sports cameras anyone can record their day of fishing, paddling  and with a little time behind a computer and video editing software compile pretty neat short videos of highlights! The following are a few mounts I have used in the past!

The DIY PVC Pipe Camera Mount:

diy-camThe inexpensive way to mount a camera to your kayak. A length of 1/2″ PVC makes for great DIY camera mounts. You have the ability to customize the mount to fit your personal needs. You may not know this but 1/2″ PVC slides loosely with no play right into a Scotty mount with ease. Want it to snug up? A single layer of Gorilla Tape around the portion that will insert into the Scotty mount will snug up nicely.

Using a 1/2″ PVC cap and drilling a hole that will allow a 1/4 – 20 screw will allow the camera to mount directly to its threaded insert. The downside of PVC is the longer the length the more flex the less of a still video image.

Small Camera Tripods:

mini tripodCheap 6″ mini camera tripods are also great due to their pivoting head creates the ability to level out the camera. To mount the mini tripod you can use zip ties mount just about anywhere. You can also remove the leg portion of this tripos and use the pivoting head on the PVC mount above. Simply install it where drilled to accept the 1/4 20 screw.

The Good Old Hat Tripod!

hat camSome Kayak anglers simply drilled a hole through the bill of a baseball cap then ran a 1/4 20 bolt though threaded side up. You now have a head mounted camera on the cheap! These hat cam hats can also be purchased from eBay and Amazon.

 

 

 

Review:

RAP-B-200-1-386-18UThis camera mount is by far the most rigid mount that is over 6″ in length I have tested yet. It has minimal flex therefore the camera is stable and captures a better shot than most other mounts. The mount featured in this review is the one with the Yak Attack style T Bolt gear track attachment also known as the RAM pin lock. This will mount to tracks from YakAttack, Jackson Kayak, Wilderness Systems, and Native along with other manufacturers bases. See the Kayak Rigging 101 Mounting Base Options Article!

Its ability to be bent and molded in any direction is phenomenal! Great for shots extended off the side of the kayak or underwater / top water shots.

This mount has become my new favorite camera mount. I haven’t even scratched the surface on camera angles it can provide.

Get yours at your local kayak dealer or RamMount.com.

Web link:

RAM Mounts Flex Arm Camera Mount

Below is Quoted from the Ram Mounts Website:

Post Pinlock Base, 18″ Rigid Aluminum Rod and Single Socket Arm

Description:

The RAP-B-200-1-TRA1-18U consists of quick release post pinlock base, 18″ rigid aluminum rod and single socket arm for 1″ ball bases/adapters. The pinlock base contains a unique t-bolt mechanism that stabilizes the entire mount, along with making it compatible with most kayak tracks. The 18″ rigid aluminum rod can be bent to position your device to its optimum viewing location. The single socket is compatible with all 1″ ball bases and adapters.

Features:
1. Quick release and installation
2. Pinlock system creates added friction and stability
3. High strength materials ensure product longevity
4. Suitable for marine environments
5. 18″ rod can be bent and repositioned
6. Compatible tracks include Yakattack’s GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems
7. Easily relocate mount along any point on the track
8. Extremely versatile for adapting to almost any application
9. Swivel/swing technology allows for easy turning of mount and prevents obstruction
10. Lifetime warranty

Material:
High Strength Composite & Aluminum

Ball Size:
1″ Rubber Ball “B” Size