YakAttack LeverLoc install on Jackson Kayak Kraken (Permanent Install)

The Jackson Kayak Kraken being 15′-6″ long requires the use of pad eyes to guide the long anchor trolley. YakAttack has created a kit along with a locking feature so there is no need for clam cleats anymore. Low profile and a top of the line anchor trolley rigging solution.

The YakAttack Leverloc install on Jackson Kayak Kraken is pretty simple given the amount of access to the inside of the hull. In this article I will cover the YakAttack Leverlock HD kit & system.  The kit includes additional backing plates to make the pulley anchor points more rigid.

In the kit you will find the following:

YakAttack LeverLoc HD Kit

1. Anchor Trolley Line
2. (4) Pad Hooks
3. (2) Harken Pulleys
4. LeverLoc and Housing
5. Trolley Ring
6. (3) backing plates with rigging bullet capability
7. Mounting Hardware

Tools Needed:

1. Drill
2. Screwdriver
3. Lighter
4. Center Punch

First check that the kit contains all parts you will need.

The included instructions are well written in a step by step fashion to guide you through the installation that best fits the application.

In this install we will be drilling only 2 holes at the pulley locations as with the Jackson Kayak Kraken there is ample inner hull access to these areas. On the (2) three hole backer blocks look for the word pulley. these are the 2 holes we will be fastening to.

The LeverLoc may be installed on either side of your kayak and is purely your discretion. Typically fishing with conventional rods and reels my preference is to install the anchor trolley on the left side of my kayak. Due to being right handed I tend to fish from the left side of the kayak. This allows me to control my fishing rod better and land my fish easier. Also being right handed the control of the line and LeverLoc is overall easier.

1. Pulley Install:

Choose a location 12″ back from the bow above the waterline. Using a center punch mark the first hole and drill. Now mount the pulley using the black 1″ 10-32 bolt in the first hole drilled. Tighten into the backing plate but do not tighten completely. Now level the pulley and mark the second hole location in the center of the pulley mouthing point. Pivot the pulley and backing pate out of the way and drill the second hole. Fasten the second bolt to the backing plate and tighten. Repeat the same steps for the rear pulley.

2. LeverLoc & Clamp Base Install:

Now for the lever lock. The Kraken does not have a way to access the inner area of the kayak for this location. Select the location within reach from your seat but not where your paddle sweep will allow your hand or the paddle to hit. The screws provided will thread into the plastic without worries of them working out or leaking.

3. Trolley Line:

Tie an overhand knot in the end of the paracord after running it through one side of the ring. Now run the paracord through the bottom of the bow pulley then the top of the stern. Make sure you run it from the stern up through the pulley then through the Clamp Base  then down through the front pulley. Tie off the ends to the trolley ring. Make sure there is no slack in the line.

4. Pad hook Install:

For locations where the paracord line rides up the gunnel you will install the pad hooks. The top line will run through and the bottom will clip in the bottom hook. Evenly spacing 2 at the stern to the center and 2 from the bow to the center seems to be the best placement.

5. Tie off
Tie the tag end of the trolley line to the ring using half hitches. Cut the remaining end but leave about 3 inches for future adjustment.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.

YakAttack Camera Mounts:

Panfish Camera Pole With Extension:

The Panfish as the first camera mounting option offered by Yak Attack is a great camera mounting solution!  With the adjustable Ram Mount ball head and 28″ pole that also swivels the camera mount is ideal for behind back shots , hero selfish shots, and underwater footage. The RAM Ball head allows the camera to be easily maneuvered to any angle on the fly. It has 3 mounting options which are the RAM Mount, The Mighty Mount/Gear Track T-bolt, and Scotty Mount. Along with other Yak Attack and RAM Mount pieces you can extend or modify camera angles. The pole with the foam measuring around 2 1/2″ in diameter will fit snug in most rod holders. The Yak Attack Dog Bone can be added to the head portion to extend the mounting distance.

The Panfish camera pole alone retails from $60.00 – $65.00 depending on the choice of mounting.

Panfish Portrait:

The Panfish Portrait like its much bigger brother is the same concept besides being a fraction the size in height. The mount is best for low angle shots and hero shots with a lightweight and compact action camera. The RAM mount  allows articulation and clamping in many different positions. Personally this mount is used in the front of the kayak. If you have a remote control for your action camera a GearTrac or a mighty mount can be added to the bow and the camera mounted here for extreme photos of you and your catch!

The Panfish Portrait Retails for $50.00 GearTrac ready without mounting base

Dog Bone:

Dog Bone is a Yak Attack Engineered RAM Mount extension pole between for use between RAM links. With two ram balls on each end it kind of resembles a dog bone! The arm is available with 1″, 1.5″ RAM ball also a 1″ to 1.5″ RAM ball conversion. It has a foam grip and floats. The extensions area available in 4″ & 12″ 2 lengths.

The DogBone with RAM links retails for $52.00

The Dog Bone Extension retails for $26.00

Boomstick:

The latest innovation by YakAttack the boom stick is a camera boom with an overall length of 44 inches in length. Included with the boomstick is a RAM ball GoPro attachment for converting your GoPro mounting system to a the RAM style ball mount. The Boom stick can both be mounted or used handheld. Mounting system is RAM post mount. The RAM post mount can mount to a RAM post mount base or mounting base VIA the YakAttack gear track system. You may also  purchase an additional post mount articulating connection to give the Boomstick more positioning and angling capabilities. The Boomstick comes standard on the New 2015 Jackson Kayak Coosa HD!!

The Boomstick retails for $65.00 

The Articulating RAM post & mounting kit retails for $30.00

GoPro Stock Mounts and Accessories:

Since the introduction of the GoPro it has become almost the standard action camera within the sport of Kayak Fishing. Bundled with the GoPro are some nice mounts. The package typically includes along with its waterproof housing  a couple versions of quick release mounts. These mounts clip into included bases that have 3M adhesive on the bottom. This 3M adhesive adheres very well to kayaks allowing you to have the freedom to mount the camera virtually anywhere along with the ability of the quick release buckle style. Just keep in mind the base with the adhesive is quite permanent. GoPro also offers some great add on mounts such as the head strap mount.
One of the mounts that is not included and I would recommend the 1/4-20 threaded tripod mount. This mount attaches to the housing converting it to a standard  camera mount which works with tripods and other industry standard photography mounts.

All of the GoPro Mounts are interchangeable between any model type of GoPRo cameras!

New Mounts include The Handler which floats. The fetch which you can strap to your dog. The sportsman mount which could mount to your fishing rod a railing a shot gun a Bow etc.

All of these mounts are great for mounting and recording your kayak fishing trip with a GoPro!